Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Jeep Patriot

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Rear bumper

This brief and simple guide outlines the procedure necessary to remove and replace the rear bumper on a Jeep Patriot. First, open the tailgate and start by unscrewing the fastening screws located at the top of the rear bumper; then unscrew the additional screws found underneath the bumper and on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the rear bumper until it is completely removed; for reassembly, simply apply the reverse procedure!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Jeep Patriot
How to Replace the Rear Light Bulb on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this new guide aimed at all of you who own a Jeep Patriot, we will explain step by step how to replace the rear light bulb yourself. First, ensure…
How to Replace the Tailgate Struts on the Jeep Patriot - Renegade
How to Replace the Tailgate Struts on the Jeep Patriot - Renegade
Jeep Patriot (2007-2017 / MK 1) In this tutorial video, you will learn how to remove and replace the tailgate struts on the Jeep Patriot, as well as on the Renegade, in simple and q…
Where is the fuse box of the Jeep Patriot located?
Where is the fuse box of the Jeep Patriot located?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the fuse box of your Jeep Patriot is located, all you have to do is follow the procedure described in the following guide. St…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos