Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Left Door Panel on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Door trim panel

To replace the left door panel on a Jeep Renegade, first loosen the screws located on the side near the locking mechanism. Then, remove the covers inside the handle and near the armrest of the window switch. This will allow you to loosen the screws underneath and detach all the fixing clips of the panel. Once the clips are released, disconnect the connectors so that the panel can be completely removed. After removal, you can replace the panel with a new replacement part.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Door Panel on Jeep Renegade
Remove the Front Door Panel on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located …
Removing the Door Panel (Right Side) on a Jeep Renegade
Removing the Door Panel (Right Side) on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Perform the removal of the door panel (front right) on a Jeep Renegade: disconnect the battery terminals located in the engine bay, use a screwdriver…
How to Remove and Replace the Door Panel on the Jeep Renegade
How to Remove and Replace the Door Panel on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's guide will show you how to remove and replace the front door panel of the Jeep Renegade. First, open the door and start unscrewing all the fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos