Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Immobiliser from the Jeep Grand Cherokee

Model: Jeep Cherokee MK 3, KJ - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the immobiliser from the Jeep Grand Cherokee, first, slide off the plastic cover around the ignition switch and loosen the fixing screws around the dashboard. This will allow you to loosen the screws securing the ignition lock to its housing and slide it out from the lower part of the steering column after removing the plastic cover.

Here, you can remove the bolts securing the immobiliser to the ignition lock and completely remove it. After removal, you can reinstall all the previously removed parts.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Jeep Grand Cherokee?
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The Jeep Grand Cherokee, unlike other models in the same category, has the battery located in a different position. Specifically, the battery of the …
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …
Resetting the Service Light on the Jeep Grand Cherokee
Resetting the Service Light on the Jeep Grand Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) After replacing the engine oil in the Jeep Grand Cherokee, proceed to reset the control system, which displays a reminder on the dashboard to alert y…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos