Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on a Jeep Cherokee MK5

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

In today's video, you will see how to remove and replace the rear light bulb on a fifth-generation Jeep Cherokee by following these simple steps. First, open the boot lid and start by removing the light unit; to do this, unscrew the two fixing screws located on the sides, then disconnect the bulb connector as shown in the video.

At this point, remove the bulb and replace it with a new one of the correct type; finally, reassemble the rear light unit, following the video to replace the other bulbs!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Lamp Bulb of the Jeep Cherokee
Replacing the Rear Lamp Bulb of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) The following steps will show you how to remove and replace the rear lamp bulb of the Jeep Cherokee. First, open the tailgate of the boot and start u…
How to Replace the Rear Headlamp Bulbs on a Jeep Cherokee?
How to Replace the Rear Headlamp Bulbs on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the rear headlamp bulbs on a Jeep Cherokee, open the tailgate of the boot to access the screws underneath next to the lamp. Once these scr…
Replacing the Front Headlamp Bulb on a Jeep Cherokee
Replacing the Front Headlamp Bulb on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today, learn how to remove and replace the front headlamp bulb on a fourth-generation Jeep Cherokee in simple steps. First, unscrew the screws on the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos