Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulbs on a Jeep Cherokee, open the tailgate of the boot to access the screws underneath next to the lamp. Once these screws are loosened, you can remove the lamp from its housing by disconnecting the connector and opening it at the back.

This will allow you to extract the old bulb from its housing and replace it with a new spare part. After the replacement, remount the lamp and reconnect it to the connector.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light Bulb on a Jeep Cherokee MK5
Replacing the Rear Light Bulb on a Jeep Cherokee MK5
Jeep Cherokee (2013-2023 / KL, MK 5) In today's video, you will see how to remove and replace the rear light bulb on a fifth-generation Jeep Cherokee by following these simple steps. Fir…
How to Replace the Front Headlight Bulb on a Jeep Grand Cherokee
How to Replace the Front Headlight Bulb on a Jeep Grand Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) To replace the front headlight bulb on a Jeep Grand Cherokee, lift the bonnet to access the engine bay. Once opened, locate the cap protecting the re…
How to Remove the Rear Headlamp on the Jeep Cherokee?
How to Remove the Rear Headlamp on the Jeep Cherokee?
Jeep Cherokee (1984-2001 / MK 2, XJ) This tutorial shows how to remove the rear headlamp on the Jeep Cherokee, a simple and quick operation needed if you need to replace a faulty bulb or…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos