Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the headlight bulb on the Jeep Grand Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee KK, MK 4 - Years 2008-2012
Part: Light bulb
Operation: How to replace the headlight bulb on the Jeep Grand Cherokee?

In order to replace the headlight bulb of the Jeep Grand Cherokee you have to go to lift the hood to have access to the engine compartment. Once opened, it will be necessary to identify the cap that is located to protect the rear part of the headlight: by removing the cap it will be possible to access the rear part of the bulb, connected to the connector. By taking out the old bulb and disconnecting it from the connector, you will be able to connect the new bulb and insert it into its housing. At the end of the operation it will be possible to close the fate by inserting the protective cap.


Posted on 28 February 2024 by ScegliAuto



How to replace the headlight bulb on the 2018 Jeep grand Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) In the following guide dedicated to your 2018 Jeep Grand Cherokee, we will find out together how to correctly replace the front headlight bulb. Befor
How to replace the headlight bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the Jeep Cherokee headlight bulbs, you need to lift the hood and remove the air filter to access the right bulb and the battery t
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) The Jeep Grand Cherokee, unlike other car models in the same category, has the battery located in a different location. Specifically, the battery of

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos