Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb in the 2018 Jeep Grand Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Headlight bulb

In this guide dedicated to your 2018 Jeep Grand Cherokee, you will learn how to correctly replace the front headlight bulb. Before proceeding, remember that this operation should be carried out with the engine off and the vehicle parked on a flat surface for safety reasons. Reach the wheel arch, locate the protective cap in the upper area, and remove it. At this point, disconnect the electrical pin and remove the bulb mounted on it. Replace it with a new one, reconnect the electrical pin, and remount the protective cap.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Jeep Grand Cherokee
How to Replace the Front Headlight Bulb on a Jeep Grand Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) To replace the front headlight bulb on a Jeep Grand Cherokee, lift the bonnet to access the engine bay. Once opened, locate the cap protecting the re…
How to Replace the Rear Headlamp Bulbs on a Jeep Cherokee?
How to Replace the Rear Headlamp Bulbs on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the rear headlamp bulbs on a Jeep Cherokee, open the tailgate of the boot to access the screws underneath next to the lamp. Once these scr…
How to Replace the Headlamp Bulb on a 2016 Jeep Cherokee
How to Replace the Headlamp Bulb on a 2016 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Let’s see how to disassemble and replace the headlamp bulb on a 2016 Jeep Cherokee, fourth series, in simple and quick steps. To access the headlamp …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos