Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to remove the rear light in the Jeep Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Tail light
Operation: How to remove the rear light in the Jeep Cherokee?

In this tutorial we can see how to remove the rear light in the Jeep Cherokee, a very simple and quick operation, to be carried out in case we need to replace a faulty bulb or the headlight itself. To do this, we open the tailgate and unscrew the three fixing bolts of the headlight using a 10mm socket wrench. At this point, we grab the headlight, rotate it slightly anticlockwise and disengage it from the bodywork. Should we need to replace a bulb, simply extract the bulb holder by turning it 45 degrees counterclockwise.


Posted on 11 April 2024 by ScegliAuto



Replacing the rear light bulb on the Jeep Cherokee MK5
Jeep Cherokee (2013-2023 / MK 5, KL) In today's video we will see how to remove and replace the rear light bulb on the fifth series Jeep Cherokee, following these simple steps. First of
How to remove the rear light in the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) .. In this tutorial we can see how to remove the rear light in the Jeep Cherokee, to be carried out in case we need to replace a light..
How to replace the rear light bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the rear light bulbs of the Jeep Cherokee you need to open the tailgate of the luggage compartment, so that you can loosen the sc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos