Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on a Jeep Cherokee?

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Tail light bulb

In this tutorial, you will learn how to remove the rear light unit from a Jeep Cherokee and replace the bulbs. This is a very simple task; you only need a 10mm spanner and, of course, the replacement bulbs. First, unscrew the 3 fixing bolts of the light unit, then pull it towards the rear of the car to disengage the lower clip. To remove a bulb, simply rotate the bulb holder 90 degrees counterclockwise and pull it out. Insert the replacements and reassemble everything by following the reverse procedure.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Bulbs in a Jeep Cherokee?
How to Replace the Stop Bulbs in a Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In this video tutorial, you will see how to replace the stop bulbs in a first-generation Jeep Cherokee. This is a very simple and quick operation. Fi…
Where is the battery located in the Jeep Grand Cherokee?
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The Jeep Grand Cherokee, unlike other models in the same category, has the battery located in a different position. Specifically, the battery of the …
Replace Remote Battery for Jeep Cherokee
Replace Remote Battery for Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Is the battery of your Jeep Cherokee flat and needs replacing? Here's how to do it. Open the Jeep remote. Remove the metal key. Once the metal key is…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos