Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to remove and replace the car stereo on a 2007 Jeep Grand Cherokee?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, MK 3, WK - Years 2004-2010
Part: Car stereo
Operation: How to remove and replace the car stereo on a 2007 Jeep Grand Cherokee?

This explanatory video shows us all the steps to follow to remove and replace the radio of your 2007 Jeep Grand Cherokee. First, with the help of the appropriate removal tool, you need to unhook and remove the mask or (cover) of your car stereo. Below, you will find four screws that must be carefully unscrewed and removed. Subsequently, it will be possible to remove the entire radio and disconnect all the wiring. When the time has come to reassemble the old car radio or replace it with a new one, it will be necessary to repeat the same steps of the disassembly phase but in reverse.


Posted on 11 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2010-2021 - Where can I find the unlock code for the radio in the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1998-2004 - How to unlock the radio of the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What is the Jeep Grand Cherokee radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - What is the Jeep Grand Cherokee car radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - How do I unlock the car stereo on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How to reset the Jeep Grand Cherokee car stereo? Read Answer
    • Grand Cherokee 2004-2010 - How to unlock Jeep Grand Cherokee car stereo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos