Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Service warning light

The oil light serves as a reminder to the driver that it is time for routine maintenance. If it appears in error even after an oil change, or if you want to postpone the operation, you need to reset the light manually using the vehicle's controls. First, turn on the ignition, access the menu, and navigate to the oil life indicator. At this point, press and hold the "OK" button for a few seconds. As soon as a message confirming the reset completion appears, release it and exit the menu.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2025 Jeep Wrangler
How to reset the oil light on the 2025 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
How to Reset the Oil Light on a Jeep Wrangler
How to Reset the Oil Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To manually and independently reset the engine oil light on your Jeep Wrangler Mk3, follow these simple steps in this mini guide. First, enter the ca…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos