Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

Resetting the oil service on a Jeep Wrangler is a very simple and quick operation. This procedure should only be performed after changing the oil and the relevant filter. First, turn on the ignition, but not the engine, then press the accelerator pedal down fully three times. Once done, turn off the ignition, turn it back on, and check that the procedure has been successful. If not, repeat the operation, ensuring you press the accelerator within 10 seconds of turning on the ignition.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to Reset the Oil Service Light in the Jeep Wrangler?
How to Reset the Oil Service Light in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In the Jeep Wrangler JK, after changing the oil and filter, you need to manually reset the corresponding warning light. First, insert the key and tur…
How to Reset the Oil Service in the Jeep Wrangler?
How to Reset the Oil Service in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) Resetting the oil service in the Jeep Wrangler is a very simple operation. Follow this tutorial to proceed. This procedure should be performed after …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos