Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Wrangler
  6. : How to reset the oil service in the Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Checks and maintenance
Operation: How to reset the oil service in the Jeep Wrangler?

In the Jeep Wrangler JK, after having changed the oil and the filter, the relative warning light must be reset manually. In this video we can see how to proceed. First we insert the key and take it to the second position, thus turning on the instrument panel but not the engine. At this point, we quickly press the accelerator pedal fully 3 times and check that the procedure has been successful by accessing the vehicle information menu. If not, we repeat the operation several times and as quickly as possible.


Posted on 10 April 2024 by ScegliAuto



How to reset the service light on the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / MK 3, JK) In this short guide we will see how to reset the service light of the ordinary maintenance of the oil change of the Jeep Wrangler JK, third generatio
To reset the service light of the Jeep Wrangler.
Jeep Wrangler (2018-2024 / JL, MK 4) Today's procedure will show us how to reset the service indicator for regular maintenance of the Jeep Wrangler's engine oil change. First, we get ins
How to reset the service light on the Jeep Wrangler
Jeep Wrangler (2018-2024 / JL, MK 4) Let's discover the procedure necessary to reset the service light for the regular maintenance of the engine oil change on the Jeep Wrangler. First of

    Frequently Asked Questions

    • Wrangler 2007-2018 - What problems could the Jeep Wrangler 2.8 crd have? Read Answer
    • Wrangler 2007-2018 - Every how many miles should the Jeep Wrangler be serviced? Read Answer
    • Wrangler 2007-2018 - How many miles can a Jeep Wrangler travel? Read Answer
    • Wrangler 2007-2018 - What are the warning lights on the dashboard of the Jeep Wrangler? Read Answer
    • Wrangler 1997-2007 - What lights are on the panel of the Jeep Wrangler? Read Answer
    • Wrangler 2007-2018 - How do you turn off the engine oil change light on a 2.0 diesel Jeep Wrangler? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos