Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service in the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the oil service in the Jeep Wrangler is a very simple operation. Follow this tutorial to proceed.

This procedure should be performed after changing the oil and the relevant filter. Start by turning on the ignition.

Use the directional buttons on the left side of the steering wheel to scroll through the central display screens until you reach the engine oil screen. At this point, turn off the ignition, turn it back on, and press the accelerator pedal fully three times.

Finally, turn off and then turn on the ignition once more and check that the procedure has been successful.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Follow the procedure to reset the service light for the regular maintenance oil change on the Jeep Wrangler. First, get in the vehicle and turn on th…
How to Reset the Service Light on a Jeep Wrangler JK
How to Reset the Service Light on a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief guide, you will learn how to reset the service light for the routine oil change maintenance on the Jeep Wrangler JK, third generation. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos