Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler JK

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

In this brief guide, you will learn how to reset the service light for the routine oil change maintenance on the Jeep Wrangler JK, third generation. First, get in the vehicle and turn on the ignition; then wait for the dashboard lights to turn off before pressing the accelerator pedal three times. At this point, you will see that the service light has been reset, displaying the new percentage of oil life on the instrument cluster (i.e., 100%); perform this operation whenever you need to reset the oil life!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to reset the service light on the 2020 Jeep Wrangler
How to reset the service light on the 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The 2020 Jeep Wrangler service light reset follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee, and can b…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos