Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Wrangler Instrument Cluster

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

In today's video tutorial, we will see the guide that will allow you to reset the service light for the regular maintenance oil change on the Jeep Wrangler. First, get inside the vehicle and turn on the ignition by turning the key twice; then press the accelerator pedal three times, subsequently turning off the instrument cluster, as shown in the video. At this point, turn on the ignition and press the menu button until you reach the oil option, ensuring it has been reset to 100%; this way, you have completed the reset operation!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
How to Reset a Jeep Wrangler
How to Reset a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this video tutorial, see how to reset a Jeep Wrangler. First, perform an oil change on your vehicle; then, get into your vehicle and sit in the dr…
How to Reset the Service Light on a Jeep Wrangler JK
How to Reset the Service Light on a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief guide, you will learn how to reset the service light for the routine oil change maintenance on the Jeep Wrangler JK, third generation. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos