Do it yourself
Frequently asked questions about cars and motorcycles

Resetting Service Light on Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Today, you will see the essential instructions to reset the service light for routine maintenance on a Jeep Wrangler. First, get into the vehicle: in the case of an automatic gearbox, leave the gear lever in position P; then insert the ignition key and turn on the ignition.

At this point, press the accelerator pedal three times and turn off the ignition: turn the ignition back on and you will notice that the service light has been reset correctly. It is recommended to follow all steps correctly for the operation to be successful!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service light on the 2020 Jeep Wrangler follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee…
Jeep Wrangler (2007-2018 / JK, MK 3) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos