Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to disassemble the radio of the Jeep Grand Cherokee Mk3

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, MK 3, WK - Years 2004-2010
Part: Car stereo
Operation: How to disassemble the radio of the Jeep Grand Cherokee Mk3

The guide shows how to remove the Jeep Grand Cherokee Mk3 car radio. As a first step it is necessary to remove the plastic finishing mask placed around the gear lever. At this point it is possible to remove the plastic trim of the central module of the dashboard, using a lever for plastic. It is not necessary to completely remove this piece, but if you want more workspace it can be removed. Unscrew the four 7 mm bolts that secure the radio and remove the piece. Disconnect the electrical wires from the radio before removing it completely.


Posted on 8 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2010-2021 - Where can I find the unlock code for the radio in the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1998-2004 - How to unlock the radio of the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What is the Jeep Grand Cherokee radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - What is the Jeep Grand Cherokee car radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - How do I unlock the car stereo on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How to reset the Jeep Grand Cherokee car stereo? Read Answer
    • Grand Cherokee 2004-2010 - How to unlock Jeep Grand Cherokee car stereo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos