Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Jeep Grand Cherokee passenger compartment ceiling light bulb replacement

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years 2004-2010
Part: Interior lights ceiling light bulb
Operation: Jeep Grand Cherokee passenger compartment ceiling light bulb replacement

Let's see in this guide how to remove and replace the bulbs of the interior ceiling light of the Jeep Grand Cherokee, following the instructions below. First we get on board the car and start by removing the small plastic ceiling lights; to do this we pry the sides with something thin, as shown in the video. At this point we are going to remove the small torpedo bulb, replacing it with the new one; insert it correctly between the two hooks and reassemble the small plastic ceiling light, following the video tutorial to the end!


Posted on 8 April 2024 by ScegliAuto



How do you replace the license plate light bulb on your Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In order to replace the light bulb on the Jeep Grand Cherokee license plate, you need to pry the side parts of the ceiling light that protects the li
How to replace the central dashboard light bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) Before we can begin, we will have to go and sit in the driver's seat of our Jeep Grand Cherokee. So let's start by disengaging and removing the gear
Jeep Grand Cherokee headlight bulb replacement
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let's see in this video how to remove and replace the headlight bulb of the Jeep Grand Cherokee, following these simple and quick steps. First we are

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos