Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, learn how to reset the service light of the Jeep Grand Cherokee by following the instructions below. First, get inside the vehicle and ensure all doors are closed; then turn on the ignition and press the accelerator pedal for ten seconds, followed by pressing and releasing it three times, as shown in the video.

At this point, turn off the ignition to complete the reset of the service light; finally, start the engine to check if the light has indeed reset!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Jeep Grand Cherokee
Resetting the Service Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Below are the steps necessary to reset the service light for routine maintenance on a Jeep Grand Cherokee. First, get in the vehicle and start the in…
How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
Resetting the Service Light on a Jeep Grand Cherokee
Resetting the Service Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short video, you will see how to reset the service light for routine maintenance on a Jeep Grand Cherokee. To do this, press the start button…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos