Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to reset the oil warning light on the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: -board computer
Operation: How to reset the oil warning light on the Jeep Cherokee

If you have just changed the oil and the relative filter in your Jeep Cherokee and you notice the warning light on the display, do not worry because you just need to perform a simple reset to eliminate it permanently. Press the "Start / Stop" button twice consecutively and start the car ignition. Then navigate within the menu with the directional arrows and find the item relating to the residual life of the oil. At this point, hold down the "OK" button for a few seconds. Once the remaining oil life returns to 100%, release the button and you are done.


Posted on 14 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Cherokee 2013-2023 - Why doesn't the Jeep Cherokee Start&Stop system work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos