Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Jeep Cherokee

Model: Jeep Cherokee MK 4, KK - Years 2008-2012
Part: Service warning light

Resetting the oil light on the 2010 Jeep Cherokee is really very simple and takes just a few seconds to complete the entire operation correctly. Let’s find out how to do it. First, insert the key and turn it to position two to start the car's dashboard. Next, turn it off and press the accelerator pedal three times in quick succession. Once done, restart the dashboard and the oil change warning light will be permanently eliminated. If you make a mistake during the procedure, turn off the dashboard and start again from the first step.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the 2008 Jeep Cherokee
How to Reset the Oil Light on the 2008 Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) In this new mini guide for all of you with a fourth-generation Jeep Cherokee (2008), we will describe the various steps necessary to complete the man…
How to Reset the Oil Light on a Jeep Cherokee?
How to Reset the Oil Light on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The procedure to reset the engine oil light is not difficult to perform and is the same for all recent Jeep models. First, insert the key and turn on…
How to Reset the Oil Light on the Jeep Cherokee?
How to Reset the Oil Light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The first step to reset the oil light on the Jeep Cherokee is to turn the ignition on by turning the key to the "ON" position. Ensure the engine rema…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos