Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Door trim panel

To remove the door panel on a Jeep Wrangler, unscrew the screws securing the trim on the armrest, then remove it and unscrew the screws underneath. Once these screws are loosened, you can detach the small panel in the handle recess to access the screws beneath it. Next, remove the window winder handle to detach the panel's retaining clips, allowing you to remove it completely. This way, you can install the new panel, reassembling all previously removed parts.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Car Radio in a Jeep Wrangler?
How to Replace the Car Radio in a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the car radio in a Jeep Wrangler, use a tool to pry the lower part of the climate control panel to remove it completely, disconnecting the…
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
How to Replace the Cabin Filter in a Jeep Wrangler?
How to Replace the Cabin Filter in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this video, see how to replace the cabin filter in a Jeep Wrangler, a very simple and quick operation. The filter is located behind the glove comp…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos