Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Engine oil

Discover the steps to perform the routine maintenance service by replacing the engine oil and oil filter in the Jeep Grand Cherokee. First, open the bonnet and start by removing the engine cover by unscrewing the filler screw; lift the vehicle and unscrew the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes. At this point, unscrew the oil filter cartridge located in the engine bay using a socket wrench with an extension, replacing it with the new one; finally, pour in the new engine oil (in this case, a 5w30).

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gearbox Oil in a Jeep Grand Cherokee?
How to Replace the Gearbox Oil in a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To replace the gearbox oil in a Jeep Grand Cherokee, access the lower part of the engine bay where you will find the gearbox oil reservoir: by unscre…
How to reset the oil change on a Jeep Grand Cherokee
How to reset the oil change on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Today we will see how to reset the oil change request on a Jeep Grand Cherokee, third series model in production from 2004 to 2010. So first of all w…
How to reset the oil service on the Jeep Grand Cherokee?
How to reset the oil service on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this tutorial, you will see how to reset the oil service on the Jeep Grand Cherokee, a very simple and quick operation to perform only after compl…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos