Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

In today's video, we will see how to remove the headlights on the Jeep Grand Cherokee. First, open the front bonnet.

Locate the fixing screws of the central structure. Remove the central grille.

Now unscrew the screws holding the bumper in place. First, remove the inner wheel arch.

Then pull off the piece, being careful to disengage it properly from its seat. Unscrew the screws that hold the headlight you want to remove.

Pull out the headlight, ensuring to disconnect the power connector. Then proceed in reverse to reinstall all parts.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs in a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulbs in a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, you will see how to replace the front headlamp bulbs in a Jeep Grand Cherokee. For the driver's side, loosen the intake manifold cl…
Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos