Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicators on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Side marker bulb

If you want to carry out a DIY intervention to replace the bulbs for the front indicators on this vehicle, you can find instructions to follow in this video tutorial and description. First, open the bonnet, locate the fastening clip for the indicator light on the inner side of the wing, press it, and push it outwards to extract it. Be careful to disconnect the electrical connector. At this point, you can take the new light unit, reconnect the electrical connector, and apply pressure to secure the light unit back onto the bodywork. If you want to install an equivalent LED bulb instead of the incandescent one, you will need to connect the wiring provided with the bulb between the connector and the light unit.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulbs on a Jeep Renegade
How to Replace the Front Indicator Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video tutorial, you will see how to remove and replace the front indicator bulb on a Jeep Renegade, following the instructions below. Firs…
How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos