Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to disassemble the original car stereo of the Jeep Grand Cherokee MK1

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 1, ZG, ZJ - Years 1992-1998
Part: Car stereo
Operation: How to disassemble the original car stereo of the Jeep Grand Cherokee MK1

In this short video we will see how to disassemble the original car stereo of the 1996 Jeep Grand Cherokee, first series, in simple and quick steps. First of all, let's get on board the car and start by disassembling and removing the cover of the central instrumentation, leveraging the sides; then we go to unscrew all the fixing screws that we find on the sides of the radio and the plastic, as shown in the video. At this point we remove the central air vents, subsequently unscrewing the car radio screw with a socket wrench; then we extract the car radio, disconnecting the electrical connectors on the back!


Posted on 19 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2010-2021 - Where can I find the unlock code for the radio in the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1998-2004 - How to unlock the radio of the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What is the Jeep Grand Cherokee radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - What is the Jeep Grand Cherokee car radio unlock code? Read Answer
    • Grand Cherokee 1998-2004 - How do I unlock the car stereo on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How to reset the Jeep Grand Cherokee car stereo? Read Answer
    • Grand Cherokee 2004-2010 - How to unlock Jeep Grand Cherokee car stereo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos