Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Headlights in the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight

See other generations:
Video tutorial

In today's video, see how to replace the original bulbs in the Jeep Grand Cherokee. We will switch from halogen bulbs to LED ones.

Remember to purchase bulbs with a resistor and cooling fan. Start by rotating the wheel on the side where you will be working in the opposite direction. Now, remove the plastic panel located in the wheel arch.

Next, take off the protective cap and disconnect the power supply. Replace the original bulbs with the new LED type.

Test their correct operation, and then reassemble everything by following the previous steps.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
How to Replace the Headlights on the Jeep Grand Cherokee
How to Replace the Headlights on the Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) In today's video, we will see how to remove the headlights on the Jeep Grand Cherokee. First, open the front bonnet. Locate the fixing screws of the …
Where to Find the OBD Port on a Jeep Grand Cherokee
Where to Find the OBD Port on a Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) To find the OBD port on your new Jeep Grand Cherokee, follow these steps. First, enter the cabin from the driver's side, ensuring that your Jeep Gran…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos