Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the oil change warning light in the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

Removing the engine oil change warning light in the Jeep Compass is very simple; follow this tutorial to proceed. This operation should only be followed after changing the oil according to the vehicle's user and maintenance manual. First, turn on the instrument panel by pressing the START button once without pressing any pedals, then fully depress the accelerator three times. Finally, turn off the instrument panel and turn it on again to check that the procedure was successful.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Oil Change Warning Light on the Jeep Compass?
How to Remove the Oil Change Warning Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) Removing the engine oil change warning light on the Jeep Compass is a straightforward task. Follow these steps after completing the oil and filter ch…
How to reset the oil light on a 2011 Jeep Compass
How to reset the oil light on a 2011 Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Our video tutorials explain how to act independently in the face of a problem with your vehicles. Today's video is about resetting the oil light on a…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Resetting the oil change light on the Jeep Compass is a very simple procedure that will take little time. To reset the oil change light, turn on the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos