Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Change Warning Light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

Removing the engine oil change warning light on the Jeep Compass is a straightforward task. Follow these steps after completing the oil and filter change. First, insert the key and turn on the ignition, but do not start the engine. Within 10 seconds, press the accelerator pedal fully down three times in a row, slowly. Once done, turn off the ignition and turn it back on, checking that the procedure was successful. If not, repeat the process, ensuring everything is done within the 10 seconds.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Resetting the oil change light on the Jeep Compass is a very simple procedure that will take little time. To reset the oil change light, turn on the …
How to reset the oil change light on the 2021 Jeep Compass
How to reset the oil change light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos