Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Air filter

In this video tutorial, you will see how to replace the air filter on a Jeep Compass. The first step is to purchase a new air filter. Next, lift the bonnet and secure it with the appropriate prop. You will need a ratchet with an 8mm and a 10mm socket and a flexible extension; proceed to loosen the nuts on the filter box. Once all the nuts are removed, lift the cover and take out the old air filter; after removing the old filter, clean the filter housing thoroughly and position the new air filter; now reassemble all parts in reverse order.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Jeep Compass 2023
How to replace the air filter of the Jeep Compass 2023
Jeep Compass (2016-2025 / 552, MK 2) If you need a guide to help you complete the replacement of the engine air filter of your 2023 Jeep Compass, then all you have to do is read the foll…
How to Replace the Cabin Filter on Jeep Compass
How to Replace the Cabin Filter on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Remove the pollen filter on the Jeep Compass. Open the glove compartment and detach the plastic guides located at the sides of the drawer, rotate the…
How to Remove and Replace the Cabin Air Filter on a Jeep Compass
How to Remove and Replace the Cabin Air Filter on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) To remove and replace the cabin air filter on a Jeep Compass, open the glove compartment and pull down the drawer using a plastic lever (use a screwd…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos