Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

Video tutorial

To reset the Service light on the Jeep Renegade, there is no procedure that can be performed by selecting options from the car's menu. This operation is only possible using a diagnostic tool: to do this, connect the tool to the vehicle's OBD port.

This port is located in the lower left part of the dashboard, near the instrument cluster. Once the device is connected, follow the on-screen instructions to reset the light.

After the reset, you can disconnect the scanner.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Renegade?
How to Reset the Service Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the Service light on a Jeep Renegade, turn the ignition key to power on the instrument cluster and check for the maintenance light. Press an…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos