Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Service warning light

In this video tutorial, you can see how to reset the service light after performing a service on your vehicle. You can manually reset the service by following a few simple steps. To reset, use the accelerator pedal, pressing it to the floor. Close all vehicle doors. Turn on the ignition and check if the maintenance light is on. Within 10 seconds, press the accelerator pedal. Turn off the ignition and after about 5 seconds, turn the ignition back on and check if the maintenance light has turned off.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Jeep Compass 2
How to Reset the Oil Light on a Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If you own a Jeep Compass Mk2 (2016-2022) and want to manually reset the engine oil light that appears on the dashboard, carefully read the following…
How to Reset the Service Light on the Jeep Compass
How to Reset the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today, let's see how to reset the expired service warning on the second series Jeep Compass. This is necessary after performing the periodic service,…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos