Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 2, 552
- Years 2016-2024 We can reset the service light on the Jeep Compass without having to use a computer with the appropriate software for workshops installed and without having to go to the mechanic. In fact, this warning light is reset using the car's pedals, specifically the brake pedal and the accelerator pedal. But how is it done? First we need to turn on the instrument cluster and hold down the brake pedal. With this pedal always pressed, we go to push the accelerator pedal all the way down three times, then release them and turn off the ignition. Upon reboot we can see that the reset was successful.
Posted on 7 October 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |