Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Sunroof from a Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026

In this guide, you will find step-by-step instructions to disassemble and replace the removable sunroof of a Jeep Wrangler. First, get into the vehicle and start unfastening the pins at the top of the cabin to remove the first piece of the lining; then unscrew the screws and disconnect the electrical connector found at the rear to remove the entire sunroof from your car, as shown in the video. At this point, proceed with reassembling the cover by applying the reverse procedure!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) Today, you will learn how to remove the upper part of the roof from a Jeep Wrangler. First, remove the parts at the top, at the height of the front s…
Jeep Wrangler (2007-2018 / MK 3, JK) Today we will explain the steps to remove the hard top of the 2018 Jeep Wrangler. The first step is to open the left door to access the inside of the…
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief and simple guide, learn how to remove the removable roof of the Jeep Wrangler, following the instructions below. First, open the front …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos