Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

This short video tutorial shows how to replace the main battery on a fourth-generation Jeep Grand Cherokee, produced from 2010 to 2021. The battery is located under the front passenger seat, so to access it, first remove the mat and then the panel covering the battery.

Now, using a 13mm socket, unscrew the two nuts of the bracket holding the battery in place and remove it. Next, using a 10mm socket, disconnect the negative terminal (black) first, followed by the positive terminal (red), and finally, extract the battery and replace it with a new one by following the reverse procedure.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Open the Remote of a Jeep Grand Cherokee
How to Open the Remote of a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…
How to Replace the Battery in a Jeep Cherokee and Jeep Grand Cherokee Key Fob
How to Replace the Battery in a Jeep Cherokee and Jeep Grand Cherokee Key Fob
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the battery in a Jeep Cherokee and Jeep Grand Cherokee key fob, first obtain a new compatible battery. Take the key and extract the emerge…
What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos