Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the horn on a Jeep Cherokee, locate the horn behind the front bumper. Disconnect the connector, then use a 13 mm socket to remove the bolt and take out the horn.

Once the horn is removed, take the new one (in the video, it has a wire that we secure to the bracket by passing the bolt through the mounting holes). Position the horn by placing the bolt in the vehicle's bracket, tighten the nut with a socket and a spanner to hold the bolt in place and prevent it from turning while tightening the nut, then reconnect the connector.

Finally, test the new horn.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Replace Remote Battery for Jeep Cherokee
Replace Remote Battery for Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Is the battery of your Jeep Cherokee flat and needs replacing? Here's how to do it. Open the Jeep remote. Remove the metal key. Once the metal key is…
Where is the fuse box located in the Jeep Cherokee
Where is the fuse box located in the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If you own a Jeep Cherokee and want to find out where the fuse box is located in the cabin, all you have to do is follow the procedure described in t…
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos