Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Warning Light on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

This video tutorial shows the simple procedure to reset the oil warning light on the 2017 Jeep Renegade. The procedure is very straightforward: first, turn on the ignition without starting the engine, then press the accelerator pedal three times and wait for 10 seconds. After 10 seconds, the reset will have occurred, although sometimes it may be necessary to perform this procedure twice as the first attempt may not succeed. Restarting the ignition will allow you to see if the reset was successful.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to restore the service light on the Jeep Renegade
How to restore the service light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Welcome to this article, where we will show you how to reset the service light of the Jeep Renegade. We recommend performing this procedure only if t…
Oil Change Reset Procedure for the Jeep Renegade
Oil Change Reset Procedure for the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, you will see how to reset the oil change light after performing an oil change on a Jeep Renegade. First, if the vehicle is on, turn it…
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
How to Check the Engine Oil Level on a Jeep Renegade 2.4 Multiair
Jeep Renegade (2014-2026 / 520, MK 1, BU) Below are the steps to check the engine oil level on a Jeep Renegade 2.4 Multiair and top up if necessary. First, open the bonnet and pull out the en…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos