Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to reset the service in the Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 4, JL - Years 2018-2024
Part: Checks and maintenance
Operation: How to reset the service in the Jeep Wrangler?

In this tutorial we can see how to reset the service in the Jeep Wrangler, an extremely simple and quick operation, to be carried out only after completing all scheduled maintenance work. Let's start by going inside the cabin, then insert the key and turn on the instrument panel. Next, we reach the vehicle information screen by scrolling to the right, position ourselves on the service screen in question and reset it by holding down the "OK" button for about 5 seconds. Then restart the panel to complete the procedure.


Posted on 10 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Wrangler 2007-2018 - What problems could the Jeep Wrangler 2.8 crd have? Read Answer
    • Wrangler 2007-2018 - Every how many miles should the Jeep Wrangler be serviced? Read Answer
    • Wrangler 2007-2018 - How many miles can a Jeep Wrangler travel? Read Answer
    • Wrangler 2007-2018 - What are the warning lights on the dashboard of the Jeep Wrangler? Read Answer
    • Wrangler 1997-2007 - What lights are on the panel of the Jeep Wrangler? Read Answer
    • Wrangler 2007-2018 - How do you turn off the engine oil change light on a 2.0 diesel Jeep Wrangler? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos