Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
520, BU, MK 1
- Years 2014-2023 The service light reset, related to the service check, should be reset only after performing the operations that make it up or that the car needs. On a 2023 Jeep Renegade vehicle, the reset of the light follows a very simple procedure: you just need to turn on the instrument panel and press the Menu button on the steering wheel. Scroll through the Menu and select the Settings option, then the oil option, and perform the reset of the light by holding down the OK button. Once finished, you can return to the main Menu and restart the panel by turning it off and on again.
Posted on 16 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |