Do it yourself
| ||||
|
Jeep Cherokee - Video tutorial
Model: Jeep Cherokee
MK 5, KL
- Years 2013-2023 To reset the oil maintenance light on a 2015 Jeep Cherokee, first turn on the ignition and without starting the vehicle, press the accelerator pedal three times. Then, press and hold the brake pedal for about ten seconds. Release the pedal and turn off the ignition, then restart the vehicle. Before resetting the oil light, make sure you have topped up the oil in the tank or replaced it as required by the vehicle.
Posted on 25 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |