Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : What is the fuse diagram for the Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: Fuse box
Operation: What is the fuse diagram for the Jeep Compass?

In this video we can see where the fuse boxes of the Jeep Compass are located and what their respective diagrams are, useful in case we need to check the fuses of a malfunctioning device. We find the first box inside the cabin, behind the small door located in the lower left area of the dashboard, on the driver's side. The second box is located inside the engine compartment, next to the battery, while the third and final box is located on the left wall of the trunk. Make sure to replace faulty fuses with replacements of equivalent characteristics.


Posted on 30 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2006-2016 - Where is the headlight fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuse boxes located in the Jeep Compass? Read Answer
    • Compass 2016-2025 - Where are the fuse boxes located on the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the fuse box located on Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the Jeep Compass cigarette lighter fuse located? Read Answer
    • Compass 2016-2025 - Where is the Start & Stop system fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuses of the Jeep Compass located? Read Answer
    • Compass 2016-2025 - Why does the Start and Stop of a Jeep Compass not work? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos