Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2016 Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

The steps to reset the service or oil light on a 2016 Jeep Compass are: - turn on the ignition; - press the accelerator pedal for about 6 seconds; - press the brake pedal three times; - release the accelerator pedal; - turn off and then turn on the ignition again; After the second ignition, you will notice that the service light, indicated by a spanner, has turned off and is therefore reset.

Simply resetting the light does not eliminate the issue, so it is necessary to check the oil level or perform a service if needed.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Reset the Service Light on a Jeep Compass
Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Let's look at the instructions and steps that will allow us to reset the service light for the regular maintenance oil change on the Jeep Compass. Fi…
How to Reset the Oil Light on a 2019 Jeep Compass
How to Reset the Oil Light on a 2019 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will see how to perform the reset operations on a 2019 Jeep Compass. To reset the service light, you need to: - turn on the ignition; - pres…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This short video tutorial shows how to reset the service light and remove the engine oil change notification on a second-generation Jeep Compass with…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos