Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the front wheel of the Kawasaki Vulcan, use a socket spanner to loosen the nut that secures the central axle. Once the nut is loosened, unscrew the bolt located at the base of the forks. When these are also loosened, you will be able to rotate the nut and remove it from the axle. Consequently, the axle can be pulled out, freeing the wheel from the fork. Once the wheel is removed, you can replace it with a new spare part. The new wheel must be secured again by inserting the axle and rotating the bolts at the base of the forks.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wheel of a Kawasaki Vulcan
How to Remove the Rear Wheel of a Kawasaki Vulcan
Vulcan Vn900b Before you can start, lift the rear side of your Kawasaki Vulcan. Begin by removing the drive belt covers, unscrewing the fastening screws. Next, uns…
How to Replace the Battery of a Kawasaki Vulcan 900
How to Replace the Battery of a Kawasaki Vulcan 900
Vulcan Vn900b To replace the battery of the Kawasaki Vulcan, you need to unclip the pins that secure the seat to its housing so that it can be completely removed. …
Removing the ECU from a Kawasaki Vulcan VN900B
Removing the ECU from a Kawasaki Vulcan VN900B
Vulcan Vn900b In today's tutorial, you will learn how to remove the ECU from a Kawasaki Vulcan VN900B in simple and quick steps. First, remove the seat of your mot…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos