Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Keeway RKF 125, loosen the screws securing it at the lower support near the kickstart and at the rear near the mudguard. Once these two screws are removed, you can loosen the two screws securing the front part of the exhaust pipe. This will allow you to completely remove the old exhaust from its position and replace it with a new spare part. After installation, check that everything works by refitting the panel at the bottom of the bike.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF 125 is carried out by loosening the screws that fix it at the lower support near the cranksh…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 On board the Keeway RKF 125, it will be possible to replace the exhaust by loosening the screws that fix it at the lower support near the footrest an…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The exhaust terminal of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support near the crank and at the rear wh…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos