Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair and restore the Kia Ceed's tire with a sensor?

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Tires

This video guide shows with extreme simplicity and explains verbally, how to disassemble a tire for the repair of a puncture, without damaging the inflation pressure control sensor of the same tire. It is clearly referring to any model of car. In the workshop, the procedure is quick due to the machinery used, so that the wheel can be immediately repositioned in its seat. Once this is done, you can reset the warning light by simply holding down the Set button for a few seconds with the instrument panel on.

Posted on 28 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure indicator on the Kia Ceed
How to reset the tire pressure indicator on the Kia Ceed
Kia Cee D (2018-2024 / MK 3, CD) These short and simple instructions will show us how to reset the tire pressure monitoring system (TPMS) light on the Kia Ceed; before performing the…
How to Replace the Number Plate Light on a 2015 Kia Ceed
How to Replace the Number Plate Light on a 2015 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) In this guide for all owners of a second series Kia Ceed (2015), discover step by step how to correctly and safely replace the number plate light. Fi…
How to Replace the Key Battery in a Kia Ceed
How to Replace the Key Battery in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) Start by pressing and holding the button located on the top side of the electric key for our Kia Ceed, which will open the physical key. Next, using …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos