Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel airbag on the Kia Cee D

Model: Kia Cee D MK 2, JD - Years 2012-2018
Part: Airbag

Removing the airbag of the Kia Cee D is an easy and quick operation to perform independently, given the similarity with other Kia vehicles. To perform this operation, we need to get on board the vehicle and turn the steering wheel to the right to insert the screwdriver into the side hole in this way we can push the internal lever on the steering wheel and open the central body. Disconnect the airbag connector and then remove the entire body. After removing the airbag, you can remove the steering wheel by simply unscrewing the central nut and then removing it. The assembly follows the reverse procedure.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the steering wheel airbag on the Kia Cee'd MK2
Replacement of the steering wheel airbag on the Kia Cee'd MK2
Kia Cee D (2012-2018 / MK 2, JD) In this short guide we will see the instructions that will allow us to remove and replace the steering wheel airbag on the second generation Kia Cee'…
How do you reset the service light of the Kia Cee'd?
How do you reset the service light of the Kia Cee'd?
Kia Cee D (2012-2018 / MK 2, JD) The operation to reset the Service light that appears on the instrument panel of the Kia Cee'd involves inserting the key into the corresponding igni…
How to replace the key battery of a Kia Ceed
How to replace the key battery of a Kia Ceed
Kia Cee D (2006-2012 / MK 1) Let's start by pressing and holding the button located on the upper side of the electric key of our Kia Cee D, going to open the physical key. After …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos