Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How to remove the Kia Ceed airbag

Kia Cee D - Video tutorial

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Airbags
Operation: How to remove the Kia Ceed airbag

The airbag is undoubtedly one of the most important devices among those present inside your car as it significantly increases the levels of protection and safety during an accident. For this reason it must never be deactivated or removed except in special cases such as, for example, maintenance and repairs of the same system. Below we will find out how to remove the airbag in the Kia Ceed. Before starting, we remind you that it is necessary to disconnect the car battery. Once this is done, unscrew the screws located in the rear area of the steering wheel with a 40mm torx wrench. Remove the steering wheel front panel and disconnect it from the yellow connector.


Posted on 16 April 2024 by ScegliAuto



How to remove the Kia Ceed airbag cushion.
Kia Cee D (2006-2012 / MK 1) In today's video, we will see how to disassemble the central cushion, containing the airbag, in the Kia Ceed. First of all, we recommend disconnectin
How to reset the service light on the Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the se
How to replace license plate light on Kia Ceed 2015
Kia Cee D (2012-2018 / JD, MK 2) In the following guide dedicated to all of you owners of a Kia Ceed second series (year 2015) we will find out step by step how to replace the licens

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos