Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Wheel Airbag on the Kia Cee'd MK2

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Airbag

See other generations:
Video tutorial

In this brief guide, follow the instructions to remove and replace the steering wheel airbag on the second generation Kia Cee'd in simple, quick steps. First, get inside the vehicle and grab a flathead screwdriver; then press the tabs located in the rear holes of the steering wheel to release and remove the airbag, as shown in the video.

At this point, disconnect the electrical connector to completely remove the airbag; simply replace it with the new one by applying the reverse procedure!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to remove the steering wheel airbag on the Kia Cee D
How to remove the steering wheel airbag on the Kia Cee D
Kia Cee D (2012-2018 / JD, MK 2) Removing the airbag of the Kia Cee D is an easy and quick operation to perform independently, given the similarity with other Kia vehicles. To perfor…
How to Reset the Service Light on the Kia Cee'd?
How to Reset the Service Light on the Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To reset the Service light that appears on the instrument cluster of the Kia Cee'd, insert the key into the ignition switch: this will allow you to n…
How to Remove the Airbag from a Kia Ceed
How to Remove the Airbag from a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) The airbag is undoubtedly one of the most important devices in your car as it significantly increases protection and safety during an accident. For t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos