Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Remove the Front Bumper on Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Front bumper

Lift the bonnet and secure it. Use a plastic or metal lever to remove the retaining rivets located at the top of the bumper. Once the rivets at the top are removed, unscrew the screws located in the wheel arch liners with a screwdriver, and finally remove the pins located at the bottom of the bumper. Pull the bumper away from the vehicle body by hand. To proceed with the reassembly: position the bumper onto the vehicle body by hand and tighten all the screws around the wheel arch liners and the perimeter.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front bumper of a Kia Sportage?
How do you remove the front bumper of a Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) In this video, we can see how to remove the front bumper of a Kia Sportage MK4: we must start by removing the inner fender, where there are four scre…
How do you remove the front bumper of the Kia Sportage?
How do you remove the front bumper of the Kia Sportage?
Kia Sportage (2021-2026 / MK 5, NQ5) It will be possible to remove the front bumper of the Kia Sportage by loosening the screws that attach it to its housing: you will need to start by d…
How to Remove the Front Headlamp to Replace the Position Bulb on the Kia Sportage Mk2
How to Remove the Front Headlamp to Replace the Position Bulb on the Kia Sportage Mk2
Kia Sportage (2004-2010 / MK 2, KM) This guide shows how to remove the front headlamp of the Kia Sportage Mk2. With the bonnet open, remove the plastic fastening pins of the front casin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos